Concurrent Determination of U‐Pb Age and REE Mass Fractions of Zircon by High Mass Resolution SIMS     

Yu Liu  Qiu‐Li Li  Guo‐Qiang Tang  Xian‐Hua Li 《Geostandards and Geoanalytical Research》2020,44(3):421-437

A combined geochronological and geochemical investigation for the same domain of zircon provides valuable information on timing and genesis, particularly in the case of multi‐growth metamorphic zircon. A high spatial resolution concurrent analytical method for zircon U‐Pb age and rare earth element content was successfully achieved in this study, using a multi‐collector secondary ion mass spectrometer (SIMS) at a ~ 8 μm diameter scale. Special instrument parameters were employed, including a high mass resolution of approximately 15000 applied to replace the previous energy filter method, and a dynamic multi‐collector mode used to reduce the measurement time to 18 min per analysis. Six zircon reference materials yielded precise and accurate ²⁰⁶Pb/²³⁸U ages, which are comparable to those obtained by the ordinary mono‐collector method, but with 2–3 times higher spatial resolution. All zircon grains measured in this study showed enriched heavy‐REE (HREE) contents consistent with previously reported values determined by LA and solution ICP‐MS methods. The light‐REE (LREE) mass fractions measured using both SIMS and LA‐ICP‐MS methods in this study, although with quite different volume, show consistent results within uncertainties.  相似文献   

桂林-阳朔地区DEM地形特征与岩性相关性分析及分类研究     

陈霄燕  潘军  邢立新  蒋立军  孙也涵  仲伟敬  范博文 《地球信息科学学报》2019,21(12):1867-1876

地形地貌是岩性解译的重要信息,地形因子作为描述DEM数字曲面几何特征的定量指标参数,可用来定量化表达不同岩性所在地区地形地貌特征。本文以桂林-阳朔地区为研究区,研究地形因子数学、地质意义,建立岩性与地形因子组合间的定量关联,进而实现岩石类型划分。本文基于ASTERGDEM提取坡度、起伏度等12个地形因子,在分析各个地形因子地质意义基础上,通过聚类分析及方差分析的多元统计分析方法,研究各岩性地形因子特性及其关联性,建立研究区岩性之间的定量差异;此外,利用因子分析方法研究岩性分类过程中的主导因素,确定适宜岩性分类方法以实现定量化岩性分类。实验结果表明：不同岩性、不同地形地貌的地形因子（组合）之间具有显著差异,基于因子分析得到的宏观地形复杂度指数（MTI）以及微观曲率指数（MCI）对岩石类型的分类精度达77.36%。研究表明,地形复杂度等地形因子可用于岩性分类,采用因子分析方法可获取反映地形地貌宏观、微观特征的定量指标,且岩性分类效果良好。  相似文献   

复杂地形景区三维导览图的设计与实现     

吴思锴  李百寿  郭家豪  李雪  张卫平 《北京测绘》2020,(1):38-43

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。  相似文献   

Revisiting the existence of an effective stress for wet granular soils with micromechanics          下载免费PDF全文

Jérôme Duriez  Richard Wan  Mehdi Pouragha  Félix Darve 《国际地质力学数值与分析法杂志》2018,42(8):959-978

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.  相似文献   

Determination of subcatchment and watershed boundaries in a complex and highly urbanized landscape          下载免费PDF全文

Aimé Kayembe  Carl P. J. Mitchell 《水文研究》2018,32(18):2845-2855

Urban development significantly alters the landscape by introducing widespread impervious surfaces, which quickly convey surface run‐off to streams via stormwater sewer networks, resulting in “flashy” hydrological responses. Here, we present the inadequacies of using raster‐based digital elevation models and flow‐direction algorithms to delineate large and highly urbanized watersheds and propose an alternative approach that accounts for the influence of anthropogenically modified land cover. We use a semi‐automated approach that incorporates conventional drainage networks into overland flow paths and define the maximal run‐off contributing area. In this approach, stormwater pipes are clustered according to their slope attributes, which define flow direction. Land areas drained by each cluster and contributing (or exporting) flow to a topographically delineated catchment were determined. These land masses were subsequently added or removed from the catchment, modifying both the shape and the size. Our results in a highly urbanized Toronto, Canada, area watershed indicate a moderate net increase in the directly connected watershed area by 3% relative to a topographically forced method; however, differences across three smaller scale subcatchments are greater. Compared to topographic delineation, the directly connected watershed areas of both the upper and middle subcatchments decrease by 5% and 8%, respectively, whereas the lower subcatchment area increases by 15%. This is directly related to subsurface storm sewer pipes that cross topographic boundaries. When directly connected subcatchment area is plotted against total streamflow and flashiness indices using this method, the coefficients of variation are greater (0.93 to 0.97) compared to the use of digital elevation model‐derived subcatchment areas (0.78 to 0.85). The accurate identification of watershed and subcatchment boundaries should incorporate ancillary data such as stormwater sewer networks and retention basin drainage areas to reduce water budget errors in urban systems.  相似文献   

基于“DEM-NDVI-土地覆盖分类”的天山博格达自然遗产地山地垂直带提取与变化分析     

冀欣阳  骆磊  王心源  李丽  万红 《地球信息科学学报》2018,20(9):1350-1360

本文基于Landsat影像数据获取天山博格达自然遗产地土地覆盖分类,结合归一化植被指数（NDVI）和数字高程模型（DEM）构建“DEM-NDVI-土地覆盖分类”散点图分析研究区植被受海拔和坡向的水热空间变化影响的分布特征,通过概率统计分析提取博格达遗产地山地垂直带,并结合研究区的气温、降水数据和NDVI变化特征分析垂直带变化的原因。研究结果表明：① 本文利用“DEM-NDVI-土地覆盖分类”散点图,揭示了研究区1989年和2016年的NDVI值和分类类别随着海拔上升的变化特征,其中NDVI值随着海拔上升呈现“倒U形”变化,而不同分类类别在一定的海拔区间内呈现出聚集效应,且不同分类类别有明显的高程界限。② 1989年和2016年博格达遗产地山地垂直带分带上限分别为：1278 m和1185 m（温带荒漠草原带）、1784 m和1759 m（山地草原带）、2706 m和2730 m（山地针叶林带）、3272 m和3293 m（高山草甸带）、3636 m和3690 m（高山垫状植被带）。③ 博格达遗产地1989年和2016年山地垂直带受区域气温升高和降雨增加的影响有较为明显的改变,其中温带荒漠草原带最为敏感,其上限变化最大,向下收缩93 m;山地针叶林带的分布范围则向两侧扩张49 m;山地草甸带带宽基本保持不变,但整体上移了约20 m;冰雪带则受到全球气候变暖的影响向上退缩54 m。  相似文献   

国产高分辨率遥感影像农村公路核查方法及其应用     

蔡红玥  袁胜古  阳柯  王芳  盛光晓 《测绘通报》2020,(3):91-95

传统的农村公路核查需要人工实地抽查或通过GNSS设备进行信息采集验核，存在成本高、效率低等问题。遥感影像具有成像范围广、时效性高、成本低、能客观反映现实情况等优点。相比于传统方法，将遥感影像引入农村公路核查，能客观、准确、高效地对农村公路相关信息进行核查。本文基于国产高分辨率遥感影像，结合农村公路遥感核查业务，采用遥感影像道路提取算法，设计并实现了一种农村公路核查方法。将本方法应用于某中部省份农村公路遥感核查业务，实际应用表明该方法能有效提高现有农村公路遥感核查的工作效率。  相似文献   

基于2 m格网点云数据的高精度DEM制作第三次国土调查坡度图     

李国华 《测绘通报》2020,(8):117-121

地形地貌随着时间的推移时刻发生变化，以高精度数字高程模型（EDE）数据制作坡度图，进而计算田坎系数，更精准地进行耕地面积计算及统计。以2 m格网点云数据生成的DEM数据为基础，按照第三次全国国土调查的相关技术要求，根据耕地坡度分级要求进行分级，生成坡度分级栅格数据图。对坡度分级栅格数据图进行矢量化，生成坡度分级矢量化数据。对矢量化数据进行图斑综合、界线平滑、拓扑重建、数据裁切等处理，制作完成调查区域坡度图及相关属性数据制作。并对生产的坡度图成果进行分析，找出不同尺度格网生产的坡度图的技术差异，并对高精度坡度的应用进行了展望。  相似文献   

基于纹理和空间特征的中分辨率影像滨海水产养殖用地提取研究     

王雪峰  冯雪  苏奋振  张宇  王武霞  蒋会平 《地球信息科学学报》2018,20(5):694-702

近年来,水产养殖用地分布广泛,但由于其在影像上所表现的复杂性和不均匀性,造成该用地类型提取中的困难,尤其针对中分辨率遥感影像。对此,本文提出了一种基于纹理和空间特征的养殖用地提取方法,该方法主要包括3个步骤：首先,利用纹理熵和归一化差异水体指数NDWI实现水产养殖用地的粗提取;然后,依据相邻地物间的关系实现同类型地物合并;最后,本文构建一种相对宽度作为地物的近似宽度,再次利用NDWI实现水产养殖用地的准确识别。本文以越南万丰湾为研究区域,以Landat-8融合影像（融合后的像元大小为15 m）的目视解译结果为标准,对本文方法与最小距离法分类结果进行比较。实验结果表明,该方法的精度可达91.13%,远高于传统的面向对象方法,并且所提方法的错误率和虚假率分别为0.09%和8.87％,表明了该方法可靠性,因而该方法可为基于中分辨率影像的地物类型提取提供一种有效手段。  相似文献   

格网DEM地形模拟的形态保真度研究   总被引：3，自引：0，他引：3  

王春  刘学军  汤国安  陶旸 《武汉大学学报(信息科学版)》2009,34(2)

分析了现有格网DEM地形模拟的失真现象,研究DEM地形模拟失真的根源.提出了DEM地形形态保真度的概念,探讨了建设高保真DEM必须解决的问题.  相似文献